TiFab supplies titanium pipe fittings to the U.S. Navy, chemical plants, pulp mills, and offshore oil and gas platforms. It is common in these environments due to its corrosion resistance and high strength to weight ratio. Reduced corrosion allowances turn into thinner wall pipe, so Sch 10 is the most common thickness we supply.
TiFab’s titanium fittings include half/full couplings, concentric/eccentric reducers, long/short radius elbows, long/short branch straight tees, reducing tees and both weld neck and lap joint stub ends.
TiFab supplies Titanium fittings to be used in a variety of industries including:
- Military & Defense
- Chemical
- Water Purification
- Pulp & Paper
- Petrochemical
Fitting Materials Stocked:
- Titanium Grade 2
- Titanium Grade 7
Titanium Fittings Specifications
| Type | Nominal Size (inches) |
Thickness | ASTM Spec |
|---|---|---|---|
| 90° Elbows - Long Radius | 1/2" to 24" | Sch. 10, 40 | B 363-WPT2 |
| 90° Elbows - Short Radius | 1" to 24" | Sch. 10, 40 | B 363-WPT2 |
| 45° Elbows - Long Radius | 1/2" to 24" | Sch. 10, 40 | B 363-WPT2 |
| Concentric Reducers | 1" x 1/2" up to 12" x 10" | Sch. 10, 40 | B 363-WPT2 |
| Eccentric Reducers | 1" x 1/2" up to 12" x 10" | Sch. 10, 40 | B 363-WPT2 |
| Long Branch Straight Tee | 1/2" to 24" | Sch. 10, 40 | B 363-WPT2 |
| Short Branch Straight Tee | 1/2" to 24" | Sch. 10, 40 | B 363-WPT2 |
| Reducing Tees | 1" x 1" x 1/2" up to 20" x 20" x 16" | Sch. 10, 40 | B 363-WPT2 |
| WN & Lap Joint Stubends | 1" to 24" | Sch. 10, 40 | B 363-WPT2 |
| Couplings (Half and Full) | 1/2" to 2" | B 348 |
Raw Materials / Distribution Contacts:
USA / International
Bill Brownlee
Materials Manager
Phone: 973-808-4961
Fax: 973-227-2141
Canada
James Bellman
Sales Manager - Canada
Phone: 514-334-5781 ext 293
Fax: 514-334-3410